In order to alter a packet’s routing direction, which packet layers can policy-based routing use?
Refer to the Exhibit.
Switch-1(config)# radius server host 10.1.1.111
Switch-1(config-radius)# key "secretkey"
Switch-1(config-radius)# exit
Switch-1(config)# aaa authentication login "LOCAL-AUTH" local
Switch-1(config)# aaa authentication login "REMOTE-AUTH" radius local
Switch-1(config)# aaa authentication enable "REMOTE-AUTH" radius enable
Switch-1(config)# aaa authentication login default tacacs local
Switch-1(config)# aaa authentication enable default tacacs enable
Switch-1(config)# line telnet
Switch-1(config-telnet)# login authentication "REMOTE-AUTH"
Switch-1(config-telnet)# exit
Switch-1(config)# line ssh
Switch-1(config-ssh)# login authentication default
Switch-1(config)# exit
Switch-1(config)# line console
Switch-1(config-line)# login authentication "LOCAL-AUTH"
Switch-1(config-line)# exit
Which authentication method will be used if a user tries to log into the switch when accessing through SSH?
To which destination MAC address are MLAG peer-keepalive packets sent?
Which function does a VRRP backup router perform?
Which port security method converts existing dynamically learned MAC addresses on an interface to this mode and not age out?
Which spanning tree feature will prevent unnecessary timeouts from DHCP servers?
A customer is upgrading their campus network Access layer switches. They require 2-10GbE uplinks, 48- 1GbE ports with PoE, and stacking capability of up to 12 units.
Which Dell EMC N-Series model will meet the customer's requirements?
N4032F#show interfaces status
N4032F#show interfaces port-channel 1
Hash Algorithm Type
1 - Source MAC, VLAN, EtherType, source module and port Id
2 - Destination MAC, VLAN, EtherType, source module and port Id
3 - Source IP and source TCP/UDP port
4 - Destination IP and destination TCP/UDP port
5 - Source/Destination MAC, VLAN, EtherType, source MODID/port
6 - Source/Destination IP and source/destination TCP/UDP port
7 - Enhanced hashing mode
A network administrator has reported poor network performance to an application server. After reviewing the logs, you determine that the server is using 100 percent of the available bandwidth on its network port. As shown in the exhibit, you configure a second link and a 2-member port-channel to an application server in an effort to increase performance. However, during testing, the network performance has not improved.
What is a possible reason why there has been no increase in the performance?
After setting up the VoIP configuration, a network administrator issues the following commands with the results shown:
console# show voice vlan
Administrative Mode………………………Enable
console# show voice vlan it gi 1/0/2
Interface………………………………….Gi1/0/2
Voice VLAN Interface Mode……………Enabled
Voice VLAN ID…………………...…….10
Voice VLAN COS Overwrite……………False
Voice VLAN DSCP Value…………...….46
Voice VLAN Port Status……………...…Enabled
Voice VLAN Authentication………….…Disabled
Based on this information, what is the Layer 3 QoS value?