Citrix 1Y0-301 today updated questions - Verified by Citrix Experts

Deploying Citrix XenDesktop 7.6 Solutions Questions and Answers

Question 1

A Citrix Engineer notices that session lingering is NOT working as expected during periods of high use.

What is the likely cause of this issue?

Options:

Session Reliability is disabled.

Session lingering timeout is too short.

Session lingering threshold is too low.

Session idle disconnect timer is set too low.

Question 2

During the testing of a NetScaler high availability setup where two-factor authentication has been verified, new user connections are failing due to authentication issues.

What should a Citrix Engineer do to resolve this issue?

Options:

Ensure that the SSL Gateway VIP is resolvable in DNS.

Ensure that the RADIUS server hostname is resolvable in DNS.

Ensure that the NetScaler LDAP account has permission to view records in Active Directory.

Ensure that the NSIP addresses of both NetScalers are configured as clients on the RADIUS server.

Question 3

Where could a Citrix Engineer check which virtual channels are active in a user session?

Options:

Citrix Studio

Citrix Director

Resource Monitor

NetScaler Insight Center

Question 4

While testing a Delivery Group prior to roll out, a Citrix Engineer notes that closing an application and then launching another takes as long as the first logon of the day.

What could a Citrix Engineer configure to shorten the launch time of subsequent applications?

Options:

Session lingering

Session Reliability

Connection leasing

Citrix Profile Manager

Question 5

Which switch is required to install Citrix Receiver with pass-through authentication?

Options:

includeSSON

enable_SSON

enable_Kerberos

ALLOWSAFEPWD=S

Question 6

In which two ways could a Citrix Engineer bind a certificate to a StoreFront server? (Choose two.)

Options:

Use the CertUtil.exe tool.

Use the IIS Management Console.

Run the 'netsh http add sslcert' command.

Use Cert Manager in Microsoft Management Console (MMC).

Question 7

Scenario: A XenDesktop deployment with 200 virtual desktops has a host connection to a single XenServer pool configured for thin provisioning. A Citrix Engineer has been instructed to implement IntelliCache.

Which steps must the engineer take to meet the requirements stated in the scenario?

Options:

Modify the existing host connection and enable IntelliCache.

Create a new resource using the existing host connection and enable IntelliCache.

Delete the existing resource, create a new one with the same name and enable IntelliCache.

Delete the existing host connection, create a new connection to the same pool and enable IntelliCache.

Question 8

Scenario: A Business Unit Manager requests Remote PC Access for a team of offshore developers. The Business Manager's request indicates the need for a silent deployment with Citrix Receiver embedded and shadowing enabled. Desktop OS machines should NOT be restarted during the installation as a restart will be scheduled when convenient. The Virtual Delivery Agent (VDA) must register initially with the Delivery Controller on the server named 'Contr01' in the domain 'mydomain,' and audio packets will flow over UDP. HDX ports should be opened if the Windows Firewall service is detected.

Which command must a Citrix Engineer execute to install the VDA to meet the requirements stated in the scenario?

Options:

XenDesktopVdaSetup.exe /quiet

/components vda,plugins /controllers "Contr01.mydomain.local" /noreboot /enable_remote_assistance

XenDesktopVdaSetup.exe /quiet

/components vda /controllers "Contr01.mydomain.local" /enable_hdx_ports /enable_real_time_transport /noreboot

XenDesktopVdaSetup.exe /quiet

/components vda /controllers "Contr01.mydomain.local" /enable_hdx_ports /enable_real_time_transport /noreboot /enable_remote_management

XenDesktopVdaSetup.exe /quiet

/components vda,plugins /controllers "Contr01.mydomain.local" /enable_hdx_ports /enable_real_time_transport /noreboot /enable_remote_assistance

Question 9

Scenario: StoreFront is currently being used to access internal resources. A Citrix Engineer needs to create a single Fully Qualified Domain Name (FQDN) to access a store internally and externally for the current StoreFront server. The internal FQDN is inside.company.com and the external FQDN is outside.company.com.

Which kind of certificate should the engineer generate to support a wide range of unmanaged devices?

Options:

Self-signed server certificate

Third-party signed server certificate

Third-party multi-domain certificate with Subject Alternative Name

Enterprise Root CA Signed certificate with Subject Alternative Name

Question 10

Scenario: Users of a corporate StoreFront deployment subscribe to their commonly used applications. A Citrix Engineer creates a second StoreFront deployment group; however when users connect to this deployment their subscribed application preferences are NOT retained.

How could the engineer ensure that the subscriptions are visible in the second deployment?

Options:

Configure subscription synchronization using PowerShell.

Edit the web.config file and include the other StoreFront deployment.

Ensure that the second StoreFront server group is in the trusted site zone.

Use a script to copy the c:\inetpub folders between all the StoreFront servers.

Question 11

Scenario: A Citrix Engineer is using the XenApp Services Support URL to enable support for legacy clients. The services URL is configured with explicit authentication. The engineer needs to configure StoreFront to support pass-through for a new group of legacy clients.

How could the engineer configure pass-through authentication for the new group of legacy clients while maintaining explicit authentication for existing legacy clients?

Options:

Add the pass-through authentication method in the site configuration file.

Change the services support site authentication method to pass-through.

Create a new store and set pass-through authentication as the 'LogonMethod' on the services URL.

Add the pass-through authentication method to the legacy services URL using the StoreFront console.

Question 12

Which mode should a database be configured for when using a SQL mirrored solution with Provisioning Services?

Options:

High-performance mode (Synchronous)

High-performance mode (Asynchronous)

High-safety mode with a witness (Synchronous)

High-safety mode with a witness (Asynchronous)

Question 13

Scenario: Provisioning Services has been installed to facilitate the deployment of Windows 8 desktops and web servers. A Citrix Engineer is instructed to provision web servers using the Web_Server vDisk. The engineer needs to create a target device and add the device to Active Directory.

The following pieces of information have been provided:

Server name: CCHWebServer
IP address: 192.168.10.115
MAC address: fa:49:fd:63:7b:be

The machine account password for the new server in Active Directory needs to be changed every seven days. As the Citrix Engineer, use the existing site, store, and device collection to implement the tasks below.

Tasks:

1. Create a target device named CCHWebServer.

2. Assign the Web_Server vDisk to the newly created target device.

3. Enable AD account password management on the vDisk.

4. Enable automatic password support in the properties of the current server.

5. Create a machine account in AD for the target device and place the machine account in the Web Server OU.

Options:

Answer:

Find the solution with all steps below.

Explanation:

The wizard is run directly from a Provisioning Services Console.

Right-click on the Site icon in the Console tree panel, then select the Streamed VM Setup Wizard... menu option. The Welcome to the Streamed VM Setup Wizard appears.

Click Next to begin the setup.
Select the type of hypervisor (Xenserver per the Simulation) to connect to, then enter the required connection credentials.

Click Next to verify the connection.

Note: For convenient reuse, the most recently used hypervisor and username will be cached in the registry of the local machine running this instance of the Console.

Note: XenServer 5.5 Update 2 hypervisors are not supported in the 5.6.1 Streamed VM Setup Wizard. System Center Virtual Machine Management (SCVMM) servers require PowerShell 2.0 to be installed.

Optional. On the Hypervisor cluster screen, select the hypervisor host or cluster to host the VMs, then click Next.
Select one VM template from the specified host, then click Next.
On the Collection and vDisk page, select the collection in which to add VMs.
Select a single shared vDisk within to assign to VMs within that collection, then click Next.

Web_Server vDisk

uk.co.certification.simulator.questionpool.PList@687ea9e0

Set the number of VMs to create, the number of vCPUs, and the amount of Memory each new virtual machine will use.

1 VM per the Simulation- CCHWebServer

Enable the radio button next to one of the following methods used for adding Active Directory computer accounts, then click Next:

Note: An Active Directory administrator will need to delegate rights to the Provisioning Services Console user to allow Active Directory account creation.

Note: The domain and OU default to those of the current user.

Note: New computer names to be created are first validated that they do not already exist as computers in Active Directory, VMs, or target devices.

If the Create new accounts method is selected:

Use – Web Server OU

uk.co.certification.simulator.questionpool.PList@687eac90
Review all configuration settings, and then click Next to confirm and finish configurations.

Note: Clicking Cancel cancels the configuration of any additional machines, and the quantity of successfully configured machines displays under the Progress bar. If the wizard fails or is cancelled in the middle of an operation, any progress made is retained. If cleanup of existing progress is required, it must be done manually, which includes removing the following:

uk.co.certification.simulator.questionpool.PList@687ead80

Question 14

Scenario: A Citrix Engineer must provide users at CCH headquarters with Windows 8 virtual desktops. These users will access hosted applications through Receiver. Personalization of the Windows 8 virtual desktops is required.

Note: The registry settings on the master image and the Virtual Delivery Agent have already been configured to allow the simultaneous use of profile management and Personal vDisk.

Tasks:

1. Create the appropriate machine catalog and name it XD_PVDISK1.

2. Create 10 virtual desktops for users at CCH headquarters.

3. Ensure each virtual desktop is assigned 2 Virtual CPUs.

4. Set the memory size for the virtual desktops to 8 GB.

5. Use the Network 0 network interface card (NIC).

6. Create Active Directory computer accounts for the virtual desktops in the CCH Virtual Desktops organizational unit(OU).

7. Use the following account naming scheme for the virtual desktops: HQDesktop001 – HQDesktop010.

8. Create the virtual desktops from the WDK_8_3 master image.

9. Create the appropriate Delivery Group named CCH_HQ_Desktops, and configure it according to the requirements above. Users at CCH headquarters are members of the HQ Desktops user group.

Options:

Question 15

Scenario: Provisioning Services has been installed to facilitate the deployment of server OS and desktop OS machines. Currently, a pool of Windows 8 desktop OS machines is being used by the Imaging and Radiology team. A virtual machine OU named CCH Virtual Desktops has been created. However, users on the Imaging and Radiology team need to use their medical imaging applications that CANNOT be installed on their workstations due to insufficient resources.

As the Citrix Engineer, you have been asked to provision desktop OS machines with sufficient resources to three Imaging and Radiology team members in order to allow them to use their new applications. All three of the desktop OS machines should be assigned the Win8 vDisk, and the desktop OS machines should maintain changes after reboot. Members of the Imaging and Radiology team need to be able to log into the CCH.com domain.

The Windows 8 virtual machines were already created with the following information:

CCHWin801 - IR Desktop 1

CCHWin802 - IR Desktop 2

IP Address: DHCP Assigned
MAC Address: 56:5b:b0:38:6a:54
NOT a member of Active Directory

CCHWin803 - IR Desktop 3

IP Address: DHCP Assigned
MAC Address: be:c8:96:6e:89:c9
NOT a member of Active Directory

In order to save time, a copy of an existing Window 8 base image vDisk was created and named Win8 and is stored in the PVS StoreOI store.

As the Citrix Engineer, use the existing site, store, and device collection to implement the tasks below.

Tasks:

1. Create and configure all 3 of the Windows 8 desktop OS machines as target devices to boot using the Win8 vDisk.

2. Name the target devices CCHWin801, CCHWin802, and CCHWin803.

3. Modify the vDisk as necessary to meet the requirements outlined in the scenario.

Options:

Question 16

Scenario: A Citrix Engineer must provide students in the Cardiology program at CCH with Windows 8 virtual desktops. These students will use hosted applications through Receiver. Personalization of the Windows 8 virtual desktops is NOT required.

Tasks:

1. Create the appropriate machine catalog and name it XD_POOLED 1.

2. Create 10 virtual desktops for students in the Cardiology program.

3. Ensure each virtual desktop is assigned 2 Virtual CPUs.

4. Set the memory size for the virtual desktops to 8 GB.

5. Use the Network 0 network interface card.

6. Create Active Directory computer accounts for the virtual desktops in the CCH Virtual Desktops organizational unit (OU).

7. Use the following account naming scheme for the virtual desktops: TrainingDesk001 – TrainingDesk010.

8. Create the virtual desktops from the WDK_8_1 master image.

9. Create the appropriate Delivery Group named CCH_Training_Desktops, and configure it according to the requirements above. Students in the Cardiology program are members of the Training Desktops user group.