Weekend Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 70percent

Certensure Logo
  1. Home
  2. Cisco
  3. Cisco Specialist
  4. 648-238 - Implementing Cisco Connected Physical Security 1 Exam (CCPS1)

Cisco 648-238 Implementing Cisco Connected Physical Security 1 Exam (CCPS1) Exam Practice Test

Demo: 22 questions
Total 154 questions
Get 648-238 Full Access Download 648-238 PDF

Implementing Cisco Connected Physical Security 1 Exam (CCPS1) Questions and Answers

Question 1

Refer to the exhibit.

You are the system administrator for a newly deployed Cisco Video Surveillance solution. Branch A cameras are streaming to Cisco VSMS-A and Branch B cameras are streaming to Cisco VSMS-B. Cisco VSOM is reporting a "Timed out waiting for server response" error when trying to load video from camera 192.168.1.102, but network pings are being responded to from your workstation at HQ. All other cameras from the 192.168.1.0 network are working as expected. Which three options could have caused the error message? (Choose three.)

Options:

A.

There is a network configuration issue with the switch and switch port that camera 192.168.1.102 is connected to.

B.

Media server 192.168.1.10 is down and not responding.

C.

The Branch A and HQ routers are updating their routing tables and they have not yet converged.

D.

There is an IP address conflict on the 192.168.1.0 network.

E.

The password on the camera was changed.

Question 2

Which four camera configurations are valid? (Choose four.)

Options:

A.

CIVS-IPC-3530:1280x720 at 30 fps

B.

CIVS-IPC-3530:1280x800 at 30 fps

C.

CIVS-IPC-3530:1920x1080 at 5 fps

D.

CIVS-IPC-6030:1280x720 at 30 fps

E.

CIVS-IPC-6030:1280x800 at 30 fps

F.

CIVS-IPC-6030:1920x1080 at 15 fps

Question 3

Which three statements about the Cisco 4- and 8-channel standalone encoder are true?

Options:

A.

They both support dual streaming on all ports.

B.

They both support motion detection.

C.

They both support simultaneous video and audio.

D.

They both support H.264 compression.

Question 4

Which four Cisco IP camera families natively support medianet? (Choose four.)

Options:

A.

Cisco 2900 Series IP Cameras

B.

Cisco 3000 Series IP Cameras

C.

Cisco 4000 Series IP Cameras

D.

Cisco 5000 Series IP Cameras

E.

Cisco 6000 Series IP Cameras

F.

Cisco 7000 Series IP Cameras

Question 5

Why would a Cisco IP camera show clear, but black and white, video images?

Options:

A.

The IR cut filter is in place.

B.

The camera is not streaming the color data.

C.

The camera has switched to night mode.

D.

The camera is not getting enough power.

Question 6

What is the approximate total usable drive capacity for a CPS-MSP-1RU-K9 populated with 4 x 1 TB HDDs?

Options:

A.

1 TB

B.

2 TB

C.

3 TB

D.

4 TB

Question 7

How should video storage requirements be calculated?

Options:

A.

camera count x bit rate x days recording

B.

bit rate x frames per second x days recording

C.

frames per second x codec x camera count

D.

camera count x bit rate x hard drive capacity

Question 8

Order the servers from lowest to highest usable capacity.

Options:

A.

2RU (6 x 1 TB), 2RU (12 x 1 TB), 2RU (6 x 2 TB), 2RU (12 x 2 TB)

B.

2RU (6 x 1 TB), 2RU (6 x 2 TB), 2RU (12 x 1 TB), 2RU (12 x 2 TB)

C.

2RU (12 x 2 TB), 2RU (12 x 1 TB), 2RU (6 x 2 TB), 2RU (6 x 1 TB)

D.

2RU (12 x 2 TB), 2RU (6 x 2 TB), 2RU (12 x 1 TB), 2RU (6 x 1 TB)

Question 9

Which network service should be enabled and configured to ensure an accurate and consistent time source for all video surveillance devices in the network?

Options:

A.

SNMP

B.

NTP

C.

DHCP

D.

medianet

Question 10

When an installation of VSM is complete, what is the Cisco recommendation and best practice for the final step that should be taken?

Options:

A.

Create a configuration backup on the same server

B.

Create a backup in a location other than the server

C.

Delete any batch administration files left over from the installation

D.

Stop and restart each archive

Question 11

You are ready to add a new media server to VSOM, as well as a new set of cameras that will archive video to this new VSMS. What is the first step you should perform in VSMC?

Options:

A.

Look in the system log for unknown messages

B.

Assign local repositories

C.

Check Mediaout to verify you have plenty of space available

D.

Define the RTP port range in the firewall

Question 12

Refer to the exhibit.

An operator is trying to log into Cisco VSM, however the login screen does not allow a change to the username (field is greyed out). What is causing this behavior?

Options:

A.

The operator is trying to log in on a workstation using an unsupported web browser, which allows only the local administrator to log in.

B.

The VSM system has just been rebooted and the user database has not been loaded yet. Refreshing the web page helps.

C.

The system is running low on resources and the access is temporarily limited to admin personnel only.

D.

The operator is trying to log into Cisco VSMC instead of Cisco VSOM.

Question 13

After initial setup, a system administrator enters the IP address of the Cisco VSM server into the URL bar of the web browser and the Cisco VSMC login page is loaded. Which two situations is causing the issue? (Choose two.)

Options:

A.

Cisco VSOM is not the selected default login view.

B.

Cisco VSOM is not running on this server.

C.

Cisco VSMS is being managed by a separate Cisco VSOM server.

D.

Under the Operations Manager menu in Cisco VSMC, the default home page is set to Cisco VSMC instead of Cisco VSOM.

Question 14

In VSM 6.3.2, which of the following options cannot be used to create a snapshot?

Options:

A.

BMP

B.

TIFF

C.

PNG

D.

VSD

Question 15

When configuring a recurring schedule in Cisco VSM, the user must select which of the following?

Options:

A.

Start Date, End Date, and Time Range

B.

Start Date and End Date

C.

Start Date, Occurrences, and Grooming Options

D.

End Date, Occurrences, and Grooming Options

Question 16

Which of the following can affect the performance of the workstation that is used to display multiple panes of surveillance video?

Options:

A.

CPU and memory only

B.

Bus speed only

C.

Graphics card capabilities only

D.

CPU, memory, bus speed, and graphics card capabilities can affect workstation performance.

E.

CPU, memory, bus speed, and graphics card capabilities will not affect workstation performance.

Question 17

Which option can affect the performance of the workstation used to display multiple panes of surveillance video?

Options:

A.

CPU and memory only

B.

bus speed only

C.

graphics card capabilities only

D.

CPU, memory, bus speed, and graphics card capabilities can affect workstation performance.

E.

CPU, memory, bus speed, and graphics card capabilities will not affect workstation performance.

Question 18

Which statement about virtualization support for Cisco VSM version 7.0.0 is true?

Options:

A.

Cisco VSM 7 can be installed on any hypervisor, such as VMware vSphere, Microsoft Hyper-V, and Citrix XenServer

B.

Cisco VSM 7 OVA can be deployed and ready to use right away, without additional configuration steps.

C.

When using internal storage of Cisco UCS C-Series server for storing media repositories, external storage (such as SAN arrays) cannot be used.

D.

Each Cisco UCS B- or C-Series server can run several instances of Cisco VSM VM at the same time, as long as the resources of the server are sufficient.

Question 19

Which of the following statements is false with regard to the Cisco 4- and 8-channel standalone encoders?

Options:

A.

They both support dual streaming.

B.

They both support motion detection.

C.

They both support simultaneous video and audio.

D.

They both support H.264 compression.

Question 20

What does it mean when the video from a camera is black and white, but otherwise the picture is clear?

Options:

A.

The IR cut filter is in place

B.

The camera is not streaming the color data

C.

The camera has switched to night mode

D.

The camera is not getting enough power

Question 21

Refer to the exhibit.

Cameras and a Cisco VSM server are connected to a Layer 2 switch. Which three steps will allow the Cisco VSM servers to see video traffic from the two IP cameras? (Choose three.)

Options:

A.

GigE 0/10 should be configured to accept traffic from all VLANs using the #switchport mode access vlan all command.

B.

GigE 0/10 should be configured to dynamic mode using the #switchport mode dynamic desirable command.

C.

Implement "router-on-a-stick".

D.

Implement inter-VLAN routing.

E.

The link between GigE 0/5 and FE 1/1 should be configured as a trunk port.

Question 22

Which two statements about differences between HD or full HD and megapixel cameras are true? (Choose two.)

Options:

A.

Aspect ratio of full HD and megapixel cameras is the same.

B.

Resolution of full HD cameras is known, whereas megapixel cameras can vary.

C.

Megapixel cameras generally have higher frame rate than full HD cameras.

D.

Megapixel camera resolutions are common among different camera vendors.

E.

Megapixel cameras can have higher resolution than full HD cameras.

Load More 648-238 Questions
Demo: 22 questions
Total 154 questions
Get 648-238 Full Access Download 648-238 PDF