BCS CTFL4 ISTQB Certified Tester Foundation Level CTFL 4.0 Exam Exam Practice Test

When writing a defect report, the tester can specify the expected result and the actual result based on the observation. The expected result is what the requirements specify, and the actual result is what was observed during testing. These elements are crucial for clearly communicating the nature of the defect to developers and other stakeholders. The other items such as test environment, test level, and root cause may not be clear or necessary at this stage of defect reporting.

References:ISTQB CTFL Syllabus, Section on defect management and reporting.

This answer is correct because error guessing is a test design technique where the experience and intuition of the tester are used to anticipate where errors, defects and failures have occurred or are likely to occur, and to design test cases to expose them. Error guessing can be based on factors such as the complexity of the system or component, the known or suspected weaknesses of the system or component, the previous history of defects, or the common types of errors in the domain or technology. Error guessing can be used as a complementary technique to other more systematic or formal techniques, or when there is insufficient information or time to apply them. References: ISTQB Glossary of Testing Terms v4.0, ISTQB Foundation Level Syllabus v4.0, Section 2.3.2.5

In Agile teams using the planning poker technique for estimating user stories, it is common practice to have further discussions and rounds of estimation if there is a significant discrepancy in the initial estimates. This helps in reaching a consensus and ensures that all team members understand the complexity and requirements of the user story. According to the ISTQB CTFL syllabus, planning poker involves discussions to clarify differences in estimates, especially when there is a wide range of values selected. By having Memb6 and Memb4, who provided the most pessimistic and optimistic estimates, explain their reasoning, it fosters a deeper understanding and encourages the team to converge towards a more accurate and agreed-upon estimate.

References:ISTQB CTFL Syllabus, Section on Agile methodologies and estimation techniques.

This answer is correct because the whole-team approach is a way of working in agile projects where all team members share the responsibility for the quality of the product, and collaborate on delivering value to the customer. The whole-team approach involves testers, developers, business analysts, product owners, and other stakeholders in planning, designing, developing, testing, and delivering the product. The whole-team approach fosters communication, feedback, learning, and continuous improvement within the team. References: ISTQB Glossary of Testing Terms v4.0, ISTQB Foundation Level Syllabus v4.0, Section 3.1.1.1

The whole team approach, often advocated in Agile methodologies, emphasizes collaboration and collective responsibility among all team members. This approach enhances the relationships within the team and improves overall collaboration, which in turn benefits the project's success. According to the ISTQB CTFL Syllabus v4.0, the whole team approach fosters better communication and cooperation, leading to more effective problem-solving and higher-quality outcomes​​.

To determine the optimal test execution schedule that minimizes the number of configuration switches and respects the dependencies, we start with the initial configuration, CONF1.

TC4: It has no dependencies and runs on CONF1 (initial configuration).

TC3: Depends on TC4 and runs on CONF1. Since TC4 is already executed, we can proceed with TC3.

TC2: Depends on TC4 and runs on CONF2. We switch to CONF2 after TC3.

TC1: No dependencies and runs on CONF2. Since we are already in CONF2, we can execute TC1 next.

TC5: Depends on TC1 and runs on CONF2. Since TC1 is already executed, we can proceed with TC5 without additional configuration switches.

By following this sequence (TC4, TC3, TC2, TC1, TC5), we respect the dependencies and minimize the number of configuration switches

Comprehensive and Detailed In-Depth Explanation:Decision rules define possiblecombinations of conditions and outcomes.

For this scenario:

Bulk discount has 3 categories(0%, 5%, 10%)

Frequent customer discount has 2 categories(Yes = +5%, No = 0%)

The total number of decision rules is:3 bulk discount options × 2 frequent customer options = 6 rules.

Thus, the correct answer is6 decision rules (B).

A failure is an event in which a component or system does not perform a required function within specified limits1. A requirement is a condition or capability needed by a user to solve aproblem or achieve an objective2. In this case, the requirement is that the diagnostics tests should execute in less than 2 seconds. Therefore, any event that violates this requirement is a failure. The only option that clearly violates this requirement is B. The diagnostic tests take too much time to execute. If the diagnostic tests take more than 2 seconds to complete, then they do not meet the specified limit and thus fail. The other options are not necessarily failures related to the specified requirement. Option A. The diagnostic tests fail to start after a system reset is a failure, but not related to the time limit. It is related to the functionality of the self-diagnostics module. Option C. The diagnostic tests that measure the speed of the memory, fail is also a failure, but not related to the time limit. It is related to the accuracy of the memory tests. Option D. The diagnostic tests fail due to incorrect implementation of the test code is also a failure, but not related to the time limit. It is related to the quality of the test code. References = ISTQB® Certified Tester Foundation Level Syllabus v4.0, Requirements Engineering Fundamentals.

Checklist-based testing is a technique where testers use pre-determined checklists to ensure that important aspects of a work product are evaluated. Over time, these checklists should be reviewed and updated periodically to maintain their effectiveness in detecting defects. As systems evolve, outdated checklists may miss new types of defects, thus diminishing their usefulness. Therefore, statement D is true according to the ISTQB CTFL syllabus​​.

This answer is correct because equivalence partitioning is a test design technique that divides the input domain of a system or component into partitions of equivalent data, such that each partition is expected to produce the same output or behavior. Equivalence partitioning aims to reduce the number of test cases by selecting one representative value from each partition. In this case, the input domain of the TAS can be divided into four partitions based on the bonus rules: less than 50k€, between 50k€ and 80k€, between 80k€ and 120k€, and more than 120k€. The test cases in the answer belong to the same partition, which is between 80k€ and 120k€, and they are expected to produce the same output, which is a bonus of 15%. References: ISTQB Glossary of Testing Terms v4.0, ISTQB Foundation Level Syllabus v4.0, Section 2.3.2.1

 The V-model is a software development life cycle model that defines four test levels that correspond to four development phases: component (unit) testing with component design, integration testing with architectural design, system testing with system requirements, and acceptance testing with user requirements. The V-model emphasizes the importance of verifying and validating each phase of development with a corresponding level of testing, and ensuring that the test objectives, test basis, and test artifacts are aligned and consistent across the test levels. Therefore, an organization that wants to follow the V-model cannot do away with integration testing, as it would break the symmetry and completeness of the V-model, and compromise the quality and reliability of the software or system under test. Integration testing is a test level that aims to test the interactions and interfaces between components or subsystems, and to detect any defects or inconsistencies that may arise from the integration of different parts of the software or system. Integration testing is essential for ensuring the functionality, performance, and compatibility of the software or system as a whole, and for identifying and resolving any integration issues early in the development process. Skipping integration testing would increase the risk of finding serious defects later in the test process, or worse, in the production environment, which would be more costly and difficult to fix, and could damage the reputation and credibility of the organization. Therefore, the correct answer is D.

The other options are incorrect because:

A. It is not allowed as organizations can decide on the test levels to do depending on the context of the system under test. While it is true that the choice and scope of test levels may vary depending on the context of the system under test, such as the size, complexity, criticality, and risk level of the system, the organization cannot simply ignore or skip a test level that is defined and required by the chosen software development life cycle model. The organization must follow the principles and guidelines of the software development life cycle model, and ensure that the test levels are consistent and coherent with the development phases. If the organization wants to have more flexibility and adaptability in choosing the test levels, it should consider using a different software development life cycle model, such as an agile or iterative model, that allows for more dynamic and incremental testing approaches.

B. It is not allowed because integration testing is not an important test level and can be dispensed with. This statement is false and misleading, as integration testing is a very important test level that cannot be dispensed with. Integration testing is vital for testing the interactions and interfaces between components or subsystems, and for ensuring the functionality, performance, and compatibility of the software or system as a whole. Integration testing can reveal defects or inconsistencies that may not be detected by component (unit) testing alone, such as interface errors, data flow errors, integration logic errors, or performance degradation. Integration testing can also help to verify and validate the architectural design and the integration strategy of the software or system, and to ensure that the software or system meets the specified and expected quality attributes, such as reliability, usability, security, and maintainability. Integration testing can also provide feedback and confidence to the developers and stakeholders about the progress and quality of the software or system development. Therefore, integration testing is a crucial and indispensable test level that should not be skipped or omitted.

C. It is not allowed because integration testing is a very important test level and ignoring it means definite poor product quality. This statement is partially true, as integration testing is a very important test level that should not be ignored, and skipping it could result in poor product quality. However, this statement is too strong and absolute, as it implies that integration testing is the only factor that determines the product quality, and that ignoring it would guarantee a poor product quality. This is not necessarily the case, as there may be other factors that affect the product quality, such as the quality of the requirements, design, code, and other test levels, the effectiveness and efficiency of the test techniques and tools, the competence and experience of the developers and testers, the availability and adequacy of the resources and environment, the management and communication of the project, and the expectations and satisfaction of the customers and users. Therefore, while integration testing is a very important test level that should not be skipped, it is not the only test level that matters, and skipping it does not necessarily mean definite poor product quality, but rather a higher risk and likelihood of poor product quality.

References = ISTQB Certified Tester Foundation Level Syllabus, Version 4.0, 2018, Section 2.3, pages 16-18; ISTQB Glossary of Testing Terms, Version 4.0, 2018, pages 38-39; ISTQB CTFL 4.0 - Sample Exam - Answers, Version 1.1, 2023, Question 104, page 36.

Comprehensive and Detailed In-Depth Explanation:Configuration management (B)ensures thatversions of software and test artifactsare properly tracked, stored, and retrievable. It allows teams to:

Restoreearlier versions of software and test work products

Maintaintraceability between requirements, tests, and code

Avoid discrepancies due tomismanaged versions

(A) is incorrectbecause defect managementtracks issues but does not restore versions.

(C) is incorrectbecause change managementcontrols changes but does not track past versions.

(D) is incorrectbecause risk managementassesses risks but does not manage software versions.

Effective configuration management ensures the ability to roll back changesand maintain system stability.

To apply one-dimensional equivalence partitioning to the ID requirement, we need to consider each condition individually:

Length of the ID: Valid partitions (5-10 characters), Invalid partitions (less than 5, more than 10) = 3 partitions.

Type of characters: Valid partitions (alphanumeric), Invalid partitions (non-alphanumeric) = 2 partitions.

First character: Valid partitions (letter), Invalid partitions (non-letter) = 2 partitions. Adding these partitions, we get a total of 3 (length) + 2 (character type) + 2 (first character) = 7 partitions. Thus, the correct answer is A​​.

This answer is correct because code-related white-box test techniques are test design techniques that use the structure of the code to derive test cases. They provide an objective measure of coverage, such as statement coverage, branch coverage, or path coverage, which indicate how much of the code has been exercised by the test cases. Code-related white-box test techniques can be used to complement black-box test techniques, which are test design techniques that use the functional or non-functional requirements of the system or component to derive test cases. By combining both types of techniques, testers can increase their confidence in the code and find more defects. References: ISTQB Glossary of Testing Terms v4.0, ISTQB Foundation Level Syllabus v4.0, Section 2.3.2.2

Test-driven development is not an example of a typical generic skill required for testing, but rather an example of a specific technical skill or a development practice that may or may not be relevant for testing, depending on the context and the objectives of the testing activities. Test-driven development is an approach to software development and testing, in which the developers write automated unit tests before writing the source code, and then refactor the code until the tests pass. Test-driven development can help to improve the quality, the design, and the maintainability of the code, as well as to provide fast feedback and guidance for the developers. However, test-driven development is not a skill that is generally expected or needed for testers, especially for testers who are not involved in unit testing or who do not have access to the source code. The other options are examples of typical generic skills required for testing, which are skills that are applicable and beneficial for testing in any context or situation, regardless of the specific testing techniques, tools, or methods used. The typical generic skills required for testing include:

Be able to use test management tools and defect tracking tools: These are tools that help testers to plan, organize, monitor, and control the testing activities and resources, as well as to record, track, analyze, and resolve the defects detected during testing. These tools can improve the efficiency, the effectiveness, and the communication of the testing process, as well as to provide traceability, metrics, and reports for the testing outcomes.

Be able to communicate defects and failures to developers as objectively as possible: This is a skill that involves the ability to report and describe the defects and failures found during testing in a clear, concise, accurate, and unbiased manner, using relevant information, evidence, and terminology, without making assumptions, judgments, or accusations. This skill can facilitate the collaboration, the understanding, and the resolution of the defects and failures between the testers and the developers, as well as to prevent conflicts, misunderstandings, or blame games.

Possess the necessary social skills that support effective teamwork: These are skills that involve the ability to interact, cooperate, and coordinate with other people involved in or affected by the testing activities, such as the test manager, the test team, the project manager, the developers, the customers, the users, etc. These skills can include communication, negotiation, leadership, motivation, feedback, conflict resolution, etc. These skills can enhance the quality, the productivity, and the satisfaction of the testing process, as well as to foster a positive and constructive testing culture. References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents:

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.1.1, Testing and the Software Development Lifecycle

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.1.2, Testing and Quality

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.2.1, Testing Principles

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.2.2, Testing Policies, Strategies, and Test Approaches

ISTQB® Glossary of Testing Terms v4.0, Test-driven Development, Test Management Tool, Defect Tracking Tool, Defect Report, Failure, Social Skill2

A new navigation system compared with a previous system is the most suitable application for testing by use cases, because it involves a high level of interaction between the user and the system, and the expected behavior and outcomes of the system are based on the user’s needs and goals. Use cases can help to specify the functional requirements of the new navigation system, such as the ability to enter a destination, select a route, follow the directions, receive alerts, etc. Use cases can also help to compare the accuracy and usability of the new system with the previous system, by defining the success and failure scenarios, the preconditions and postconditions, and the alternative flows of each use case. Use cases can also help to design and execute test cases that cover the main and exceptional paths of each use case, and to verify the satisfaction of the user’s expectations.

The other options are not the most suitable applications for testing by use cases, because they do not involve a high level of interaction between the user and the system, or the expected behavior and outcomes of the system are not based on the user’s needs and goals. A billing system used to calculate monthly charge based on a large number of subscriber parameters is more suitable for testing by data-driven testing, which is a technique for testing the functionality and performance of a system or component by using a large set of input and output data. The ability of an antivirus package to detect and quarantine a new threat is more suitable for testing by exploratory testing, which is a technique for testing the functionality and security of a system or component by using an informal and flexible approach, based on the tester’s experience and intuition. The suitability and performance of a multimedia (audio video based) system to a new operating system is more suitable for testing by compatibility testing, which is a technique for testing the functionality and performance of a system or component by using different hardware, software, or network environments. References = CTFL 4.0 Syllabus, Section 3.1.1, page 28-29; Section 4.1.1, page 44-45; Section 4.2.1, page 47-48.

Comprehensive and Detailed In-Depth Explanation:Boundary Value Analysis (BVA)focuses on test cases at the edges of partitions because defects often occur at boundaries. The temperature ranges are:

≤7 (Too cold → W)

[8-21] (Standstill → X)

[22-29] (Ideal → Y)

≥30 (Too hot → Z)

Atwo-point BVAmeans testing both thelower and upper boundary valuesof each partition.The correct selection{7,8,21,22,29,30}includes:

7 → Boundary of Too Cold (W)

8 → Lower boundary of Standstill (X)

21 → Upper boundary of Standstill (X)

22 → Lower boundary of Ideal (Y)

29 → Upper boundary of Ideal (Y)

30 → Lower boundary of Too Hot (Z)

This ensures maximum boundary coverage.

Test automation allows you to produce tests that are less subject to human errors, as they can execute predefined test scripts or test cases with consistent inputs, outputs, and expected results. Test automation can also reduce the manual effort and time required to execute repetitive or tedious tests, such as regression tests, performance tests, or data-driven tests. Test automation does not demonstrate the absence of defects, as it can only verify the expected behavior of the system under test, not the unexpected or unknown behavior. Test automation does not avoid performing exploratory testing, as exploratory testing is a valuable technique to discover new information, risks, or defects that are not covered by automated tests. Test automation does not increase test process efficiency by facilitating management of defects, as defect management is a separate activity that involves reporting, tracking, analyzing, and resolving defects, which may or may not be related to automated tests. References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents:

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 3.3.1, Test Automation1

ISTQB® Glossary of Testing Terms v4.0, Test Automation2

Good traceability between the test basis and test work products provides several advantages: i.Analyzing the impact of changes:Traceability allows for easy identification of which parts of the test work products will be affected by changes in the requirements or design, facilitating impact analysis. iv.Making testing auditable:Traceability ensures that there is a clear connection between the requirements and the test cases, which makes the testing process auditable and provides evidence that all requirements have been tested​​.

In software testing terminology, a failure is an observable deviation of the software from its expected behavior. A defect (or bug) is the cause of the failure in the software's code. In this case, the observed slowdown is the failure, while the underlying memory leak in the application code is the defect causing this failure. This distinction is clearly outlined in the ISTQB CTFL Syllabus v4.0, which differentiates between failures (observable issues) and defects (underlying issues in the code)​​.

In a formal review process, the recorder's role is typically responsible for documenting the findings of the review team, including action items, decisions, and recommendations. This ensures that there is an accurate record of what was discussed and agreed upon, facilitating follow-up and continuous improvement. Therefore, statement C is correct as per the ISTQB CTFL syllabus​​.

Comprehensive and Detailed In-Depth Explanation:TheAgile Testing Quadrantsframework categorizes tests based on theirpurpose and audience:

Quadrant 1 (Q1): Technology-facing tests (unit and component tests).

Quadrant 2 (Q2): Business-facing tests supporting development (e.g., BDD tests).

Quadrant 3 (Q3):Business-facing tests that critique the system (B).

Includesusability testing, exploratory testing, and UATto ensure software meets user expectations.

Quadrant 4 (Q4): Technology-facing tests that critique the system (e.g., performance, security testing).

Option B correctly defines Q3since it focuses onevaluating the user experience, exploring the system, and validating business expectations.

Comprehensive and Detailed In-Depth Explanation:During iteration planning, testers provide input on risk analysis, testability, and the feasibility of test automation.Participating in risk analysis (B)helps identify areas needing more extensive testing.

(A) is incorrectbecause the test strategy is usually set at a higher level (project or release level).

(C) is incorrectas release planning is broader than iteration planning.

(D) is incorrectsince writing user stories is mainly the responsibility of theproduct owner, though testers contribute to defining acceptance criteria.

Risk-based test prioritizationensures testing efforts are aligned with business needs and software risks.

Comprehensive and Detailed In-Depth Explanation:Equivalence partitioning (EP)divides input values into classes where test casesrepresent all possible valuesof each partition. The partitions in this scenario are:

≤7 (too cold → W)

8-21 (standstill → X)

22-29 (ideal → Y)

≥30 (too hot → Z)

OptionC ({7,10,25,29})covers all partitionsby selecting representative values:

7 → Too cold (W)

10 → Standstill (X)

25 → Ideal (Y)

29 → Upper boundary of ideal (Y)

Other options do not cover all partitions adequately.

This answer is correct because a walkthrough is a type of review where the author of the work product leads the review process and explains the work product to the reviewers. The reviewers are not required to prepare for the review in advance, and the main objective of the walkthrough is to establish a common understanding of the work product and to identify any major defects or issues. A walkthrough is usually informal and does not follow a defined process or roles. In this case, the review for a high-level architectural document written by a software architect matches the characteristics of a walkthrough. References: ISTQB Glossary of Testing Terms v4.0, ISTQB Foundation Level Syllabus v4.0, Section 2.4.2.2

Comprehensive and Detailed In-Depth Explanation:Test management focuses on planning and control activities. Test planning (II) involves defining test strategies, schedules, and resources, while test monitoring and control (V) ensures that testing activities are aligned with objectives and tracked effectively. Other activities, such as test design (I) and peer review facilitation (IV), are typically handled by testers or test leads.

This answer is correct because configuration management is a process of establishing and maintaining consistency of a product’s performance, functional, and physical attributes with its requirements, design, and operational information throughout its life. Configuration management helps ensure that all relevant project documentation and software items are uniquely identified in all their versions and therefore can be unambiguously referenced in test documentation. This supports testing by providing traceability, consistency, and control over the test artifacts and the software under test. References: : ISTQB Glossary of Testing Terms v4.0, : ISTQB Foundation Level Syllabus v4.0, Section 2.2.2.2

A test status report is a document that provides a snapshot of the testing activities and their progress during a particular period. It should include information about any impediments encountered during the test execution and the actions taken to resolve them, which helps stakeholders understand the challenges and how they were addressed​​ .

Option B describes an activity related to test completion rather than ongoing status reporting. Option C is incorrect because the structure and contents of the report may vary based on the audience's needs. Option D, while important, is not the primary purpose of a test status report, which focuses more on the current status and impediments.

Acceptance Test-Driven Development (ATDD) tests focus on verifying whether the system meets the specified acceptance criteria. The most critical path to test first would be the scenario where everything is done correctly (happy path), ensuring the basic functionality works as expected.

The new user provides all valid data.

This ensures the registration form works and the user receives a confirmation email.

This test covers the basic functionality and will help verify that the primary use case is handled correctly before testing invalid or edge cases.

This answer is correct because a typical objective of testing is to ensure that a software has been tested using a combination of test techniques, such as black-box, white-box, or experience-based techniques, that are appropriate for the test objectives, test levels, and test types. Testing using a combination of test techniques can increase the effectiveness and efficiency of testing, as different techniques can target different aspects of the software quality, such as functionality, usability, performance, security, reliability, etc. Testing using a combination of test techniques can also reduce the risk of missing defects that could be detected by one technique but not by another. References: ISTQB Foundation Level Syllabus v4.0, Section 2.3.1.1, Section 2.3.2

Metrics can be collected during and at the end of testing activities to assess various aspects including progress against the planned schedule and budget, the current quality of the test object, the adequacy of the test approach, and the effectiveness of the test activities with respect to the objectives. Collecting these metrics helps in understanding the overall performance and quality of the testing process​​.

Comprehensive and Detailed In-Depth Explanation:The whole-team approach promotes collaboration among stakeholders (business representatives, developers, and testers) to ensure better quality and project success (A). This approach allows for early identification of issues, enhances shared responsibility, and improves software quality. Option C is a valid but indirect benefit, while options B and D do not directly describe the core advantage of the whole-team approach.

A successful review process involves all participants being trained in the review type and understanding its objectives. This ensures that everyone can contribute effectively and understand what is expected from the review. Proper training helps to identify defects accurately and facilitates constructive feedback, leading to a more efficient and effective review process. Hence, statement C is correct according to the ISTQB CTFL syllabus​​.

This answer is correct because it follows the logical dependencies and allows executing the test cases in priority order. TC4, TC3, and TC2 are executed first because they have the highest priority. TC6 is executed next because it has a logical dependency on TC2. TC1 is executed next because it has a logical dependency on TC5. Finally, TC5 is executed last because it has the lowest priority. References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 documents

A key skill for testers is the ability to use various tools to automate repetitive tasks, enhancing the efficiency and effectiveness of testing processes. This includes tools for test execution, test management, and defect tracking. The ISTQB CTFL Syllabus v4.0 emphasizes the importance of using tools to improve productivity and reduce manual effort in repetitive testing tasks, making this a critical skill for testers​​.

The principle of early testing is applicable to all recognized software development models, including sequential, iterative, and incremental models. Starting test activities early in the lifecycle helps in identifying and addressing defects as soon as possible, which can save time and costs by preventing defects from propagating to later stages of development. This proactive approach enhances the overall quality and efficiency of the software development process.Reference:ISTQB CTFL Syllabus V4.0, Section 1.3

White-box test techniques are test design techniques where the test cases are derived from the internal structure of the software, including its architecture, code, and logical flow. These techniques involve the tester having knowledge of the internal workings of the software to create test cases that ensure all possible paths and conditions are tested. This is in contrast to black-box test techniques, which focus on input-output behavior without considering the internal structure.Reference:ISTQB CTFL Syllabus V4.0, Section 4.3

Rule 5 in the decision table indicates that when the object is within 5 metres of the vehicle and the sensitivity mode is switched "on", no LED is lit. This matches the conditions and actions described in the decision table provided, ensuring that only the red LED is lit when the sensitivity mode is on and the object is within 1 metre, otherwise no LED is lit .

This answer is correct because shift-left in testing is an approach that aims to perform testing activities as early as possible in the software development lifecycle, in order to find and fix defects faster and cheaper, and to improve the quality of the software product. Continuous integration is a practice that supports shift-left in testing, as it involves integrating and testing the software components frequently, usually several times a day, using automated tools and processes. Continuous integration can reduce the time between the introduction of a defect and its detection, thereby reducing the cost to fix it and the risk of accumulating defects that could affect the functionality or performance of the software product. References: ISTQB Foundation Level Syllabus v4.0, Section 3.1.1.3, Section 3.2.1.3

Comprehensive and Detailed In-Depth Explanation:A defect report should contain relevant details to help developersreproduce and fix the defect efficiently. The essential elements include:

Test object & environment (A)– To ensure reproducibility.

Title & summary (B)– For quick identification.

Expected vs. actual results (D)– To describe the discrepancy.

Thestructure of the test team (C)is irrelevant for defect tracking and resolution.

The test pyramid concept suggests that there should be more low-level tests (unit tests) and fewer high-level tests (end-to-end tests).

As we move higher up the pyramid (e.g., from unit tests to integration tests to end-to-end tests), each test covers more production code.

Higher-level tests (like end-to-end) validate larger parts of the application, including multiple units and their interactions.

This aligns with the principle that higher-level tests provide broader coverage but are fewer in number and more expensive to run and maintain.

The question is about marking the correct sentences among the given statements related to defects, failures, and mistakes. According to the ISTQB glossary, the definitions of these terms are1:

Defect: A flaw in a component or system that can cause the component or system to fail to perform its required function, e.g. an incorrect statement or data definition. A defect, if encountered during execution, may cause a failure of the component or system.

Failure: An event in which a component or system does not perform a required function within specified limits.

Mistake: A human action that produces an incorrect result.

Therefore, out of the five given statements, only two are correct, namely:

A human mistake may produce a defect: This is true, as a mistake is a source or cause of a defect, e.g. a programmer may make a mistake in writing a code statement, which results in a defect in the software component.

When a defect exists in a system it may result in a failure: This is true, as a defect is a potential or actual cause of a failure, e.g. a defect in the software component may cause the system to fail to perform a required function when the defect is encountered during execution.

The other three statements are incorrect, namely:

Defects are a result of environmental conditions and are also referred to as “Failures”: This is false, as defects are not a result of environmental conditions, but of mistakes or other factors, and defects are not the same as failures, but rather the causes of failures.

A system will totally fail to operate correctly when a failure exists in it: This is false, as a system may not necessarily fail completely or stop operating when a failure occurs, but may continue to operate with reduced functionality or performance, or with incorrect results.

Defects occur only as a result of technology changes: This is false, as defects can occur due to various reasons, not only technology changes, such as human mistakes, design flaws, requirement changes, hardware failures, etc.

References:

1: ISTQB Glossary of Testing Terms 4.0, 2023, available at ISTQB) and ASTQB).

The statement that refers to good testing practice to be applied regardless of the chosen software development model is option D, which says that involvement of testers in work product reviews should occur as early as possible to take advantage of the early testing principle. Work product reviews are static testing techniques, in which the work products of the software development process, such as the requirements, the design, the code, the test cases, etc., are examined by one or more reviewers, with or without the author, to identify defects, violations, or improvements. Involvement of testers in work product reviews can provide various benefits for the testing process, such as improving the test quality, the test efficiency, and the test communication. The early testing principle states that testing activities should start as early as possible in the software development lifecycle, and should be performed iteratively and continuously throughout the lifecycle. Applying the early testing principle can help to prevent, detect, and remove defects at an early stage, when they are easier, cheaper, and faster to fix, as well as to reduce the risk, the cost, and the time of the testing process. The other options are not good testing practices to be applied regardless of the chosen software development model, but rather specific testing practices that may or may not be applicable or beneficial for testing, depending on the context and the objectives of the testing activities, such as:

Tests should be written in executable format before the code is written and should act as executable specifications that drive coding: This is a specific testing practice that is associated with test-driven development, which is an approach to software development and testing, in which the developers write automated unit tests before writing the source code, and then refactor the code until the tests pass. Test-driven development can help to improve the quality, the design, and the maintainability of the code, as well as to provide fast feedback and guidance for the developers. However, test-driven development is not a good testing practice to be applied regardless of the chosen software development model, as it may not be feasible, suitable, or effective for testing in some contexts or situations, such as when the requirements are unclear, unstable, or complex, when the test automation tools or skills are not available or adequate, when the testing objectives or levels are not aligned with the unit testing, etc.

Test levels should be defined such that the exit criteria of one level are part of the entry criteria for the next level: This is a specific testing practice that is associated with sequential software development models, such as the waterfall model, the V-model, or the W-model, in which the software development and testing activities are performed in a linear and sequential order, with well-defined phases, deliverables, and dependencies. Test levels are the stages of testing that correspond to the levels of integration of the software system, such as component testing, integration testing, system testing, and acceptance testing. Test levels should have clear and measurable entry criteria and exit criteria, which are the conditions that must be met before starting or finishing a test level. In sequential software development models, the exit criteria of one test level are usually part of the entry criteria for the next test level, to ensure that the software system is ready and stable for the next level of testing. However, this is not a good testing practice to be applied regardless of the chosen software development model, as it may not be relevant, flexible, or efficient for testing in some contexts or situations, such as when the software development and testing activities are performed in an iterative and incremental order, with frequent changes, feedback, and adaptations, as in agile software development models, such as Scrum, Kanban, or XP, when the test levels are not clearly defined or distinguished, or when the test levels are performed in parallel or concurrently, etc.

Test objectives should be the same for all test levels, although the number of tests designed at various levels can vary significantly: This is a specific testing practice that is associated with uniform software development models, such as the spiral model, the incremental model, or the prototyping model, in which the software development and testing activities are performed in a cyclical and repetitive manner, with similar phases, deliverables, and processes. Test objectives are the goals or the purposes of testing, which can vary depending on the test level, the test type, the test technique, the test environment, the test stakeholder, etc. Test objectives can be defined in terms of the test basis, the test coverage, the test quality, the test risk, the test cost, the test time, etc. Test objectives should be specific, measurable, achievable, relevant, and time-bound, and they should be aligned with the project objectives and the quality characteristics. In uniform software development models, the test objectives may be the same for all test levels, as the testing process is repeated for each cycle or iteration, with similar focus, scope, and perspective of testing. However, this is not a good testing practice to be applied regardless of the chosen software development model, as it may not be appropriate, realistic, or effective for testing in some contexts or situations, such as when the software development and testing activities are performed in a hierarchical and modular manner, with different phases, deliverables, and dependencies, as in sequential software development models, such as the waterfall model, the V-model, or the W-model, when the test objectives vary according to the test levels, such as component testing, integration testing, system testing, and acceptance testing, or when the test objectives change according to the feedback, the learning, or the adaptation of the testing process, as in agile software development models, such as Scrum, Kanban, or XP, etc.References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents:

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.1.1, Testing and the Software Development Lifecycle1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.2.1, Testing Principles1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.2.2, Testing Policies, Strategies, and Test Approaches1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.3.1, Testing in Software Development Lifecycles1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.1, Test Planning1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.2, Test Monitoring and Control1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.3, Test Analysis and Design1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.4, Test Implementation1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.5, Test Execution1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.6, Test Closure1

ISTQB® Glossary of Testing Terms v4.0, Work Product Review, Static Testing, Early Testing, Test-driven Development, Test Level, Entry Criterion, Exit Criterion, Test Objective, Test Basis, Test Coverage, Test Quality, Test Risk, Test Cost, Test Time2

Comprehensive and Detailed In-Depth Explanation:Branch testingis a structural testing technique that ensures eachbranch (decision point)in the control flow is executed at least once. The goal is to measurebranch coverage, which is the number of branches exercised divided by the total number of branches.

(A) describes statement testing, not branch testing.

(B) and (D) introduce confusion between decisions and statements, whereas branch testing focuses on control flow branches.

In simple terms,branch testing checks that all possible decision outcomes (true/false) are executed, whereas statement testing only ensures that each line of code is executed.

The acceptance criteria associated with a user story are the conditions that must be met for the user story to be considered done and to deliver the expected value to the user. They are often written in different formats, such as rule-oriented, scenario-oriented, or table-oriented, depending on the nature and complexity of the user story. They represent an aspect of a user story referred to as confirmation, which is one of the so called “3 C’s” of user stories. The other two aspects are card and conversation. Card refers to the concise and informal description of the user story, usually following the template: “As a [role], I want [feature], so that I can [benefit]”. Conversation refers to the ongoing dialogue between the stakeholders and the team members to clarify and refine the user story and its acceptance criteria. Therefore, option C is the correct answer.

References: ISTQB® Certified Tester Foundation Level Syllabus v4.01, Section 3.2.2, page 35-36; ISTQB® Glossary v4.02, page 37.

Comprehensive and Detailed In-Depth Explanation:Black-box testing techniques focus ontesting the functionality of the software without knowledge of its internal workings(D). They derive test cases fromspecifications, requirements, or expected behavior.Option Adescribes exploratory testing,Bcontradicts the definition by focusing on implementation, andCincorrectly includes "implied behavior," which is not a core characteristic of black-box testing.

This answer is correct because static testing and dynamic testing are both types of testing that can be used to highlight issues associated with non-functional characteristics, such as usability, performance, security, reliability, etc. Static testing is a type of testing that involves the analysis of software work products, such as requirements, design, code, or test cases, without executing them. Dynamic testing is a type of testing that involves the execution of software work products, such as code or test cases, using inputs and verifying outputs. Both static testing and dynamic testing can be applied to different test levels and test types, and can use different test techniques and tools, to evaluate the non-functional characteristics of the software product. References: ISTQB Glossary of Testing Terms v4.0, ISTQB Foundation Level Syllabus v4.0, Section 2.2.1.1, Section 2.2.1.2

Comprehensive and Detailed In-Depth Explanation:Maintenance testing is carried outwhenever changes are made to an existing system, including enhancements, defect fixes, and system migrations (C). It is not limited to adaptive maintenance (A) and is needed even when no defects are reported (B). Test cases are essential to validate fixes and prevent regressions (D).

This answer is correct because the test procedures of all test cases that have been executed are not a typical content of a test completion report for a test project. A test completion report is a document that summarizes the test activities and results at the end of a test project. It usually includes information such as the test objectives, scope, approach, resources, schedule, results, deviations, issues, risks, lessons learned, and recommendations for improvement. The test procedures of all test cases that have been executed are part of the test documentation, but they are not relevant for the test completion report, as they do not provide a high-level overview of the test project outcomes and performance. References: ISTQB Foundation Level Syllabus v4.0, Section 2.5.3.2

The correct test execution sequence should consider both the dependencies between the requirements and their priorities. According to the diagram, the sequence begins with R2 (P1) as it is a prerequisite for R3 (P4). Then R1 (P3) can be tested. R3 follows as it depends on R2. Next, R7 (P4) should be tested before R6 (P3) and R5 (P2), as indicated by their dependencies. Finally, R4 (P1) and R8 (P1) can be tested. Therefore, the best sequence is R2, R1, R3, R7, R6, R5, R4, R8.Reference:ISTQB CTFL Syllabus V4.0, Section 5.1.5

Retrospectives are a crucial part of Agile practices, aiming to identify process improvements and determine how to implement them effectively. They should involve participants discussing not only what improvements could be made but also how to integrate and sustain those improvements within the project context, including the software development lifecycle. This makes statement D accurate according to the ISTQB CTFL syllabus​​.

One of the common risks associated with test automation tools is the underestimation of the effort required to maintain test scripts. Test scripts can become outdated or broken due to changes in the application, requiring significant effort to update and maintain them. This risk is highlighted in the ISTQB CTFL syllabus under the discussion of the benefits and risks of test automation.

References:ISTQB CTFL Syllabus, Section on test tools and automation.

Non-functional testing includes testing of both technical and non-technical quality characteristics. Non-functional testing is the process of testing the quality attributes of a system, such as performance, usability, security, reliability, etc. Non-functional testing can be applied at any test level and can use both black-box and white-box test techniques. Non-functional testing can cover both technical aspects, such as response time, throughput, resource consumption, etc., and non-technical aspects, such as user satisfaction, accessibility, compliance, etc. Therefore, option B is the correct answer.

References: ISTQB® Certified Tester Foundation Level Syllabus v4.01, Section 1.3.1, page 13; ISTQB® Glossary v4.02, page 40.

Project risks are the uncertainties or threats that may affect the project objectives, such as scope, schedule, cost, and quality. According to the ISTQB Certified Tester Foundation Level (CTFL) v4.0 syllabus, some of the factors that contribute to project risks are:

Skill and staff shortages: This factor refers to the lack of adequate or qualified human resources to perform the project tasks. This may result in delays, errors, rework, or low productivity.

Problems in defining the right requirements: This factor refers to the difficulties or ambiguities in eliciting, analyzing, specifying, validating, or managing the requirements of the project. This may result in misalignment, inconsistencies, gaps, or changes in the requirements, affecting the project scope and quality.

Contractual issues: This factor refers to the challenges or disputes that may arise from the contractual agreements between the project parties, such as clients, suppliers, vendors, or subcontractors. This may result in legal, financial, or ethical risks, affecting the project delivery and satisfaction.

The other options are not correct because they list factors that contribute to PRODUCT risks, not project risks. Product risks are the uncertainties or threats that may affect the quality or functionality of the software product or system. Some of the factors that contribute to product risks are:

Poor software quality characteristics: This factor refers to the lack of adherence or compliance to the quality attributes or criteria of the software product or system, such as reliability, usability, security, performance, or maintainability. This may result in defects, failures, or dissatisfaction of the users or stakeholders.

Software does not perform its intended functions: This factor refers to the deviation or discrepancy between the expected and actual behavior or output of the software product or system. This may result in errors, faults, or malfunctions of the software product or system.

References = ISTQB Certified Tester Foundation Level (CTFL) v4.0 syllabus, Chapter 1: Fundamentals of Testing, Section 1.5: Risks and Testing, Pages 14-16.